ProductsHeating ControlNewsFAQContact
Search
toggle mobile menu Language
Menu
hero image
NEW Firmware

Nobø Connect now with Zigbee 3.0

Nobø is following the industry standard and making the SPC and SWT follow the Standard HVAC cluster library in the Zigbee 3.0 standard. What does this mean to you? This means that the devices are open and ready for most Zigbee 3.0 system straight of the box.
icon save
Security by Design
Zigbee uses modern encryption and secure key management. Devices must be paired with your network before they can communicate, limiting the attack surface
icon save
Broader integration
Zigbee 3.0 is an open standard supported by a wide range of platforms. For SPC/SWT, this means easy control via any Zigbee platform that supports HVAC (heating) functions.
icon save
Power consumption
Zigbee 3.0 offers less strain on your Wi-Fi, stronger in-home coverage via mesh, wide interoperability, and solid security — all without affecting your heater’s power consumption.
icon save
Better range!
Every Zigbee device that’s powered by mains can relay the signal to other devices, creating a self-healing mesh network. This often results in more stable coverage compared to Wi-Fi devices that connect directly to your router.
hero image
I already have SPC and SWT installed!

ConfigR

Just installed SPC or SWT? Update to Zigbee 3.0 by downloading the ConfigR app (iOS/Android). Create a user, and add your devices. See the video and manual below for guidance.
ConfigR guide Video Tutorial

Which system?

In theory you should be able to use any system that supports Zigbee 3.0. But in a real-world scenario, this all depends on the Hub/ app provider. The Following system has been tested and verified. Athom Homey (Nobo app) , Datek Eva and Futurehome As we go along we are testing more systems and will update the list.

image

Which Firmware do I have?

If you are unsure of which FW your device has there is an easy way to check this. On the SPC push down the wheel and hold it down for 8-9 second then release, A screen will pop up and show you which FW On the SWT just hold the confirmation button for 8-9 seconds and same screen will pop up. FW that contains Standard Zigbee will be 3.18 or higher.

image